Hello LabView User					ReadMe.txt - 23. January, 2003 / MT
==================					===================================

The burster instrument drivers were developed with National Instruments LabWindows/CVI.
Since the LabView version 4.0 it is possible to convert this LabWindows drivers into 
LabView VI-drivers.

Proceed as follows:

- Copy the file "instrsup.dll" into the registered target system directory 
".\Windows\System" or ".\Windows\System32".
- Copy all LabWindows-files into a created project directory.
- Start the conversion in LabView with selecting "File" -> "Convert CVI .FP File".
- Select the "*.fp" file and confirm the settings.
- Select the "bpxxxx.dll" driver file and confirm.
- Now LabView converts the LabWindows driver into a LabView VI-driver.

If you have any further question, please apply to

burster przisionsmetechnik gmbh & co kg 
Software Support
Thomas Meder
++49-7224/645-75 Fax -88
E-mail :  thomas.meder@burster.de

or contact

National Instruments